Thursday, 18 October 2012

Reindeer near KAIRA

Even though it is late in the year, we are still getting reindeer near the site. These ones visited the other day (but did not manage to get in!)

Reindeer on the entrance road to KAIRA. (Photo: D. McKay-Bukowski)

Tuesday, 16 October 2012

LBA mausoleum sealed

With winter approaching, and the LBA cabling problem sorted out, we've sealed up the mausoleum ready for winter.

The LBA cable mausoluem, with a bit of frost on the roof. (Photo: D. McKay-Bukowski)

Saturday, 13 October 2012

Snow's getting closer

Actually taken a couple of weeks back, but even back then the snowline was descending down the mountain slopes. In the foreground is the RF-container, which houses the KAIRA digital signal processing electronics.

The RF-container at KAIRA, with the HBA mausoleum attached to the front of it. (Photo: D. McKay-Bukowski)

Friday, 12 October 2012

LBA silhouette

A dramatic image to end the week. This photograph was taken looking up past the Low-Band antennas towards the the western skyline near Iso-Malla. With a stunningly clear sky it is perfect conditions for seeing the aurora. We've had a successful week, this week, so it seems fitting to finish it with a shot of the aerials where the radio waves from the depths of space first make contact.


LBA aerials at KAIRA. (Photo: D. McKay-Bukowski)


Have a nice weekend!

Thursday, 11 October 2012

First all-sky image with KAIRA

Yesterday we managed to take our first all-sky image with KAIRA. The observing frequency is 59.6 MHz and we used the entire LBA array.
First all-sky image with KAIRA. A 1-second integration at 59.6 MHz.
The image is not calibrated (in fact, we still have a long way to go). However, there are still a number of features visible: The three red areas on the left are (from bottom to top) the galactic plane, Cyg A and Cas A. The amber-coloured patch just to the right of Cas A is probably a calibration effect.

The next step is to acquire calibration data and determined better solutions for the amplitude, phase and delay errors.

Getting this far has been a lot of work, so thanks to everyone who has helped achieve this.

Wednesday, 10 October 2012

Polarisation testing on the LBA

Now that the cables are all connected, we need to test that they are all correct and working. We've already done the tests on the band-pass spectra, now we need to check that all polarisations are correctly connected. To do this, we modify the field pattern of each dipole using a large metal object (we had a loop antenna handy, so we used that).

Applying the loop antenna to the antenna. Is it just me, or does this look like Grindelwald's Sign?



We then go from X- to Y-polarisation on each antenna, applying the antenna to each, and look at the drop-out pattern, when plotting RCU (= channel number) versus time (= sequence number).
Progression of signal drops, going from dipole to dipole. Onwards and upwards, and not a single step back!

As you can see, there is a monotonically increasing progression, which means that the polarisation are correct. The slight wave in the line reflects the addition walking time between antennas at various parts of the process.

Yet another quality-assurance check complete!

Thursday, 4 October 2012

Ionospheric Scintillation with KAIRA Mode "357"

Last Friday, 28th September, we described how we had managed to combine use of the Low-Band Antenna (LBA) and High-Band Antenna (HBA) parts of the KAIRA array simultaneously during observations, a mode we labelled "357".  

We have been experimenting with this mode for two weeks now, and have even extended it a little further by dividing the HBA tiles used so that they can "point" in two different directions at once:  Each HBA tile consists of 16 dipole antennas which are usually combined using an analogue beam-former.  This analogue beam is quite wide (~20 degrees) and can be directed anywhere in the sky.  However, if we wish to use the HBA array with multiple beams, these beams will have little, if any, sensitivity if they point outside of this analogue beam.  Only one analogue beam can be formed; it is not possible to form any others... unless they use different tiles of course!  

Now each sub-division of the complete array will reduce the sensitivity accordingly.  So principally we have been using the new mode to observe two very powerful radio sources in the sky, Cassiopeia-A and Cygnus-A.   Although these are quite broad radio sources, the widths of the beams we are using make these appear to be "point" radio sources to KAIRA.  This means that the sources appear to scintillate ("twinkle") in radio light.  

Plots from a simultaneous observation of the radio sources Cassiopeia-A (upper plot) and Cygnus-A (lower plot).  The x-axis is time, in seconds, over approximately a one-hour period; each point on the y-axis corresponds to an observing frequency, with the zero point being equivalent to 30MHz and the 121 point being equivalent to 250MHz.  The plots have been normalised by subtracting a running average to bring out the structures.
The scintillation is exactly the same effect that we see in visible stars in the night sky:  In this case, the stars appear to twinkle because of density variations moving around in our atmosphere.  The effect is very much like watching a stone in a slightly rough pool of water: The stone appears to shift and shimmer with the ripples on the water.  In the case of radio stars, they may appear to twinkle because of density variations moving around in our ionosphere, or the solar wind, or even the interstellar medium.

The structures that we can see in these plots of data from KAIRA are most likely to be due to ionospheric scintillation.  The radio waves are scattered and refracted by density structures of different sizes moving around in the ionosphere.  Where the structures in these plots appear vertical at the highest frequencies, the scintillation is said to be "weak":  In other words, the radio waves are scattered by the density variations but these scattered waves do not subsequently interfere between themselves.  At the lowest frequencies, we can see the scattered waves interfering amongst themselves, in some cases forming a classic 'hash' pattern as the waves are alternately enhanced and cancelled as they interfere.