Showing posts with label UHF. Show all posts
Showing posts with label UHF. Show all posts

Friday, 9 May 2014

5 MHz EISCAT sampling ... First time ever

During the last day of the quadriphase-coded experiments, we decided to push the limits of the EISCAT sampling system by sampling at 5 MHz with one channel! This allows us to study the plasma lines. In pulse-compression quadriphase code groups are used!

This posting concludes reporting from this successful campaign! We will be back in this business early June!


Two quadriphase codes transmitted and sampled at 5 MHz at EISCAT!

Thursday, 8 May 2014

EISCAT plasma parameter plot 8 May 2014

Today we continued the quadriphase-coded experiments with EISCAT UHF in Tromsø, Norway! For comparison purposes, we ran first regular Beata experiment 11:00-11:12 UT. Then we used pretty much the same setting as yesterday, i.e. four code cycles. Below are the preliminary plasma parameter fits. We note that the F-region maximum is in rather good correspondence with the dynasonde measurement! We had one crowbar at 12:26!



Thursday, 6 March 2014

Recent developments in pulse-compression - Upgrading EISCAT UHF

Pulse-compression techniques are regularly used in high-power ionospheric incoherent scatter radars. For example, the EISCAT Tromsø has binary coding possibility. As I have understood pulse-compression, it is typically due to two factors:

  1. High-power amplifier technology supports transmitting longer pulses with lower peak power instead of shorter pulses with very high peak power.
  2. The wanted range resolution is of the order of microseconds or less while range extent of the target is typically milliseconds. Thus if we send microsecond pulse in millisecond intervals, the transmitter is nonoperational for a very large portion of time.
Because of these reasons, we use pulse-compression techniques in high-power radars, i.e. Barker codes, chirped signals etc.

SGO team has concentrated on designing a number of different coding and analysis techniques. The first significant breakthroughs were done already in 1980s with alternating coding development. During recent years, we have been working on perfect pulse-compression coding techniques. These codes were first reported in

[1] M. Lehtinen, B. Damtie, P. Piiroinen and M. Orispää, Perfect and almost perfect pulse compression codes for range spread targets, Inverse Problems and Imaging 3 (2009) 465-486.

A succession to this paper was reported in

[2] L. Roininen and M. S. Lehtinen, Perfect pulse-compression coding via ARMA algorithms and unimodular transfer functions, Inverse Problems and Imaging 7 (2013) 649-661.

The paper [1] included a crucial discussion on comparison of measurements developed by Petteri Piiroinen from University of Helsinki. This mathematical formalism gives us a solid background to compare different kinds of measurements and hence also coding techniques. Paper [2] shows the relation of the coding problem to the classical study of unimodular polynomials with constrained coefficients.

As [1] and [2] need amplitude and binary phase coding, we have not yet run any real measurements with these codes in high-power radars. Of course at some point we will do this also! However, in 2012, we ran a series of polyphase coded experiments with the Millstone Hill ISR in Massachusetts, USA. These were reported in Radio Science

[3]  I. I. Virtanen, F. Lind, L. Roininen, P. Erickson, W. Rideout, M. Orispää, J. Vierinen, and M. Lehtinen,  Polyphase-coded incoherent scatter measurements at Millstone Hill, Radio Science, 48 (2013).

To our knowledge, this was the first reported polyphase-coded ISR experiment.  Of course we want to do similar things with EISCAT system. Hence during the Finnish November EISCAT campaign, we discussed a possibility for doing quadriphase coded experiments by minor modifications of the current EISCAT UHF. This option is now available and we are going to schedule these experiments for the May campaign. Provided that everything will go ok, we will report these experiments in the web log and hope to publish them in peer-reviewed journals!

Naturally we are also continuing the development of the mathematical background for pulse-compression code comparison. This week, we are going to submit a paper on pulse-compression of continuous codes to Inverse Problems and Imaging. The reference is:

[4] L. Roininen, M. S. Lehtinen, P. Piiroinen and I. I. Virtanen, Perfect pulse compression coding via unimodular Fourier multipliers, manuscript in progress.

Hence, we are working on both the mathematical background of the pulse-compression techniques and upgrading the existing hardware to more advanced coding possibilities. And of course... The EISCAT_3D needs a whole lot more!

EISCAT UHF Klystrons!

Wednesday, 20 November 2013

Joint KAIRA/EISCAT observations

Continuing on with an overview of Poppy’s observations.



When not working on pulsar observations, Poppy has been running a riometry experiment that is also run at the LOFAR station in Chilbolton (UK).

The most exciting part of this involved simultaneous observations of the ionosphere with KAIRA, EISCAT at Tromsø, and Chilbolton. As KAIRA and EISCAT are co-located, they can be used to observe the same section of the ionosphere. This is done by observing zenith at both sites (using the VHF at EISCAT and using the LBA at KAIRA), then by pointing the UHF over KAIRA, and by pointing some of KAIRA’s beamlets over EISCAT. This allows us to simultaneously observe the ionosphere above both EISCAT and KAIRA using two different instruments, verifying KAIRA’s riometry observations.


A diagram of the simultaneous observations of the ionosphere
using EISCAT and KAIRA. (Credit:  P. Martin)



Derek sciencing [ed: this was Poppy's caption, not mine!] (Photo: P. Martin)
 

Text/images: P. Martin

Wednesday, 6 November 2013

EISCAT UHF

A couple of weeks ago, the KAIRA team was at the EISCAT radar site at Ramfjordmoen, near Tromsø, to carry out some observations. We planned to control KAIRA remotely and do the observations with EISCAT locally. It didn't quite work out that way, as an unexpected power failure required a "quick" return to the site for a reset, but otherwise all went okay.

The weather we had in Tromsø was lovely and we took some photographs to share. Today we are featuring the 32m UHF radar.

EISCAT transmitter hall, control building and UHF 32m dish. (Photo: D. McKay-Bukowski)

The 32m UHF dish, seen from the feeder-bridge of the VHF antenna. (Photo: D. McKay-Bukowski)

Saturday, 26 October 2013

Visit to EISCAT

This week the KAIRA observers have been at the EISCAT facility near Tromsø, Norway. This was to carry out observations of the ionosphere using both the UHF and VHF radars while KAIRA was also observing the same region. During the visit, we had an opportunity to tour some of the facilities, along with other visiting scientists who were there for their own experiments.

Visiting scientists touring the EISCAT facility. (Photo: M. Rietveld)

Saturday, 16 February 2013

DA14 Measurements Running Smoothly

EISCAT Tromsø tracking of asteroid 2012 DA14 is running smoothly.

Haystack joined tracking at 22:00 UT and Goldstone joined at 00:10 UT. All three radar facilities are now tracking DA14. EISCAT will continue until 08:00 UT.

We got a confirmation that Haystack has observed DA14!

Update: Goldstone confirms observation of DA14!

Friday, 15 February 2013

Observing Team

Some asteroid 2012 DA14 observing team members:

Observer in charge: Researcher Juha Vierinen from Sodankylä Geophysical Observatory, Finland


Observer 2: Researcher Lassi Roininen from Sodankylä Geophysical Observatory, Finland


Observer 3 (sitting): Mike Rietveld, EISCAT Scientific Association, Norway
Observer 4 (front): Jussi Markkanen, EISCAT Scientific Association, Finland


EISCAT Engineer on duty: Erlend Danielsen, EISCAT Scientific Association,  Norway


Co-located Observer / Meteor Trajectory Expert: Derek McKay-Bukowski, Sodankylä Geophysical Observatory & Chilbolton Observatory, UK


Radar is Running - Testing and Calibration

EISCAT Tromsø switched on 18:00 UT. At the moment, final testing and calibration before the asteroid DA14 flyby.

Tracking asteroid 2012 DA14 starts 20:00 UT!

Transmission test is ok (see photo)!


Media Info on DA14 Tracking


During the asteroid 2012 DA14 flyby, media can contact observers 20:00-08:00 UT.

Researcher Juha Vierinen +358 40 482 7774, juha.vierinen'at'sgo.fi  (Observer in Charge)
Researcher Lassi Roininen +358 40 482 7773, lassi.roininen'at'sgo.fi

Other members of the observing team are Jussi Markkanen, Erlend Danielsen and Arild Stenberg from EISCAT Scientific Association.

Updates of the observations will be posted in Kaira blog and Twitter!

DA14 European and US Radar Schedules

Three large-scale research facilities will track asteroid 2012 DA14 with radars. The asteroid will be first observable in the European sector and later in the American sector. Tentative schedules are:

EISCAT (Tromsø, Norway) will track Feb 15 20:00-08:00 UT.

Haystack (Massachusetts, USA) will track Feb 15 22:00-08:35 UT.

Goldstone (California, USA) will track Feb 16 00:10-08:35 UT. Goldstone will continue Feb 18, 19 and 20.

Asteroid will not be observable at Arecibo radar in Puerto Rico.

Asteroid diameter is estimated within a factor of two of about 50 meters! Radar observations will give refined estimates on the size and shape!

Thursday, 14 February 2013

Latest photo from the radar prior to DA14 flyby

With a glimmer of sunshine against the mountain tops, and an impressive view, 2012 DA14 observer Lassi Roininen took a moment to take this fantastic photograph of the UHF radar dish at the EISCAT facility at Tromsø, Norway.

EISCAT UHF radar dish and transmitter and control buildings. (Photo: Lassi Roininen)

The event is getting closer, and it's getting exciting. The team are ready and the system is calibrated and set to go.

Wednesday, 13 February 2013

Radar system used for 2012 DA14 observations

The EISCAT facilities near Tromsø (Norway) include a radar there which operates at 931 MHz. This is what the team will be using for their observations of 2012 DA14.

The dish is 32m in diameter and is fully steerable. The radar power is provided by klystron technology and coded radar pulses are transmitted towards the asteroid 2012 DA14.

Using timing, pulse-decoding and all the other required calibration techniques, the faint echoes that are received from the asteroid can be interpreted to discern critical parameters about the fly-by.

Events of this kind are not common and there is a lot of work to be done to prepare the system for the observations. The team is working flat-out to ensure that everything is in order, calibrated, tested and ready for the pass.

Photo: D. McKay-Bukowski

Pointing calibration for the 2012 DA14 event

In order to carry out the observations of 2012 DA14, we must carefully check the radar pointing calibration. Remember that this asteroid will fly past quite quickly, so it is essential to check that the alignment is correct.

To do this, we plot the anticipated asteroid trajectory. We then search for radio calibration sources (point-like radio "stars") that are in the sky and work out when they would cross the asteroid trajectory.


The trajectory of the asteroid, as seen from the EISCAT-UHF.site. The circles are the locations on that trajectory where bright radio calibration sources pass. These will be used to carry out the pointing accuracy calibration tests ahead of the actual observations. (Plot by J. Vierinen)

We then can observe these sources as they are in that position. Because these are the anticipated positions of the asteroid, we can check to make sure everything is ready for the critical observations.

Friday, 17 August 2012

Tetrastatic VHF

The EISCAT facility has a number of facilities scattered across Fenno-Scandinavia. These include two so-called "remote stations", located at Kiruna (Sweden) and Sodankylä (Finland), where there are 32m antennas which currently operate in the UHF band. However, due to encroaching radio-frequency interference the decision (announced this morning on the EISCAT weblog) has been made to convert these two dishes to VHF to be able to receive scattered signals from the Tromsø VHF transmitter. To quote from their post:
The EISCAT Council, on recommendation from the EISCAT Science Oversight Committee (SOC), decided that the remote UHF receivers located at Kiruna, Sweden, and Sodankylä, Finland, should be converted to the current VHF frequency of 224 MHz. The background to this is that the UHF frequency of 930 MHz lies within the radio band, which is nowadays used for GSM mobile communication, and the frequency protection, which was in place at the remote sites, has ended a while ago. In Sodankylä, e.g., we have noticed in autumn 2011, that new transmitters had come on-line, which makes incoherent scatter observations impossible due to interference. Thus the EISCAT Scientific Association has lost its unique capability of tristatic ISR measurements.


In order to preserve this ability, a plan has been made to convert the UHF 32-m parabolic dishes to 224 MHz in order to receive echoes of the Tromsø VHF radar signal when the radar points to zenith. Unfortunately, the VHF is not allowed to point further south than zenith, but it is estimated, that even at zenith, the remote sites will see the VHF signal. Astonishingly, even though the remote antennae are designed for the higher frequency, when considering all advantages and disadvantages of the conversion, they should perform at the VHF frequency just as well as at the UHF frequency.
What is not mentioned in the announcement is that KAIRA also operates in these frequencies. This means that not only is there the ability to carry out tri-static measurement with EISCAT at VHF freqencies, but with KAIRA there is a fourth station providing the ability for tetrastatic measurements. This is a fantastic oppotunity for us and makes some of the science possibilities even more interesting.

Sunday, 17 April 2011

Radio bands

Throughout this web log, there are lots of references to the radio bands: UHF, VHF, VLF, etc. For example, KAIRA will receive VHF frequencies, whereas some of the EISCAT radars operate at VHF, where others work at UHF frequencies. This chart is to put them all in perspective with respect to each other.





















































































AbbreviationFrequency RangeWavelength RangeName
ELF3 to 30 Hz10,000 to 100,000 kmExtremely low frequency
SLF30 to 300 Hz1000 to 10,000 kmSuper low frequency
ULF300 to 3000 Hz100 to 1000 kmUltra low frequency
VLF3 to 30 kHz10 to 100 kmVery low frequency
LF30 to 300 kHz1 to 10 kmLow frequency
MF300 to 3000 kHz100 to 1000 mMedium frequency
HF3 to 30 MHz10 to 100 mHigh frequency
VHF30 to 300 MHz1 to 10 mVery high frequency
UHF300 to 3000 MHz10 to 100 cmUltra high frequency
SHF3 to 30 GHz1 to 10 cmSuper high frequency
EHF30 to 300 GHz1 to 10 mmExtremely high frequency


The two arrays of KAIRA will operate in the high and low ends of the VHF band. The KAIRA HBA will work from 120-240MHz and the KAIRA LBA will operate from 30-80 MHz. As explained earlier, there is a gap between the two, as this is where FM-radio broadcasts occur, and it is impossible to conduct delicate scientific experiments in this region of the spectrum due to such broadcasts.

Ref: http://en.wikipedia.org/wiki/ITU_Radio_Bands

Thursday, 14 April 2011

High-power large aperture radars

High-power large aperture radars were first envisioned by Bill Gordon (1958) as instruments that can measure the incoherent scatter from free electrons in the Earth's ionosphere. He also proposed that such a radar could be used to observe the Sun and various planetary targets. The first experimental measurements of ionospheric incoherent scatter was soon thereafter reported by Bowles (1958), and many of the other goals were also soon realized when the Jicamarca Radio Observatory and the Arecibo Ionospheric Observatory were built. Both of these radars are still the largest in the world, and have contributed much to our knowledge of Earth's atmosphere and space. The Jicamarca radar located in Peru has a square shaped phased array antenna field with dimensions of 300*300 m. The Arecibo Ionospheric Observatory in Puerto Rico has a spherical dish with a diameter of 305 meters.


Since the early days, many more high-power large aperture radars have been built in various places around the world: These include the Millstone Hill, Svalbard, Tromsø UHF, Tromsø VHF, Kharkiv, Irkutsk, MU, Sondrestrom, PROUST, Poker Flat, and Resolute Bay radars. There are also various large radars of comparable size around the world used for space surveillance purposes. The most recently built Poker Flat and Resolute Bay radars are digital phased array radars, which allow fast beam steering and allow 3D imaging of the ionosphere. The KAIRA receiver array will also be a phased array system, which will function as a bistatic receiver for the Tromsø VHF radar. Some of these radars are shown in the following figure


High-power large aperture radar systems of the world. Photograph credits: Arecibo (NAIC), Jicamarca (JRO), Tromsø (EISCAT Scientific Association), Svalbard (Tony van Eyken), Millstone Hill (MIT Haystack), Kharkiv (Institute of Ionosphere, Kharkiv), Poker Flat and Resolute Bay (Craig Heinsleman).


As the name already suggests, high-power large aperture radars are radars with large antenna aperture and transmission power. As the beam width of an antenna is typically inversely related with the collecting area, these radars also have fairly narrow beams (typically 1 degree). They also typically transmit fairly long coded pulses in order to increase the average transmitted power. In some bi-static planetary radar applications the transmission can be continuous.

While the primary purpose of most high-power large aperture radars is the study of ionospheric plasma, they can also be used for a large variety of other uses, including meteor, space debris, planetary , and lower atmospheric studies.

Thursday, 10 March 2011

The EISCAT UHF transmitter

If you read the previous web log post about the EISCAT site at Sodankylä, you may be wondering how a dish fitted with a UHF receiver can receive signals from a VHF transmitter at Tromsø. Well, that's because there is actually a second transmitter at the Tromsø site.

As we mentioned in the first post about the EISCAT facilities near Tromsø (Norway), there is a radar there which operates at 931 MHz. Like the receiver dishes in Kiruna and Sodankylä, the UHF transmitter system in Tromsø is also a 32-metre diameter dish, although of a slightly modified design. This is because of the additional waveguides required by the transmitter, which take the high-power signals from the klystrons in the so-called transmitter hall, out to the dish and then through a couple of rotating wave-guide joints to get it to the focal position for beaming into the upper-atmosphere.

Together with the passive receivers at Kiruna in Sweden and Sodankylä in Finland, EISCAT’s Tromsø UHF radar transmitter forms this tri-static system. The UHF system has been operating since 1981, with several major upgrades in the intervening period.

Wednesday, 9 March 2011

EISCAT-Sodankylä

If you have looked at the map showing the positions of LOFAR, EISCAT and KAIRA, it will be apparent that there is actually three EISCAT sites on the Fenno-Scandinavian mainland. Apart from the transmitter site at Tromsø and the receiver site at Kiruna (home of the EISCAT_3D demonstrator array) there is also an EISCAT site in Finland.

This is actually located at Sodankylä Geophysical Observatory, the institute behind the KAIRA project. Like the Kiruna site, the EISCAT system in Sodankylä is a receiving station (there is no transmitter). The two dishes are copies of each other, built at the same time and deployed to the two sites. They are fully-steerable, 32m-diameter, prime-focus paraboloids. Both are fitted with UHF receivers (although on occasion other receiving systems have been fitted for specific experiements). The photograph shows well the backing structure and counterweights of the Sodankylä dish.

In fact, at the time these were built, there were two other identical dishes built, which were deployed as part of the European VLBI Network in Italy (one at Medicina and one at Noto).

Apart from some of its own unique research projects, the 32m dish at Sodankylä acts as a one of the receivers for bi- or tri-static ionospheric radar observations.

Photo credit: Th. Ulich

Wednesday, 2 March 2011

Space debris

Space debris is an ever growing environmental problem occurring in space. After over 50 years of space rocket launches, our near space is littered with approximately 10^6 objects larger than 1 cm in diameter, weighing a total of 5500 tons (Nasa ODQN Jan 2010). As the atmosphere is very thin in near-Earth space, these objects do not come down very quickly, causing danger to Earth orbiting spacecraft for tens or hundreds of years to come. Once these objects are in space, there is also a probability that these objects will eventually collide with each other and create even more debris. As the probability of in flight collisions increases as a function of debris in orbit, a catastrophic collisional cascade process that renders regions of near-Earth space unusable is a real risk. This scenario is often referred to as the Kessler syndrome. A video of the evolution of space objects is shown below.




A hypervelocity collision.


EISCAT has been active in space debris measurements for over 10 years, producing hundreds of hours of space debris measurements, covering two major break ups: the Chinese anti-satellite collision and the collision of the Iridium and Cosmos satellites.

Most of the measurements are so called beam-park measurements where the antenna is positioned at a fixed pointing. During a 24-hour period, while the Earth rotates around its axis, a representative statistical sample of debris is measured, containing information on orbital elements of the debris. The time of day provides information on the longitude of the ascending node, while the Doppler shift gives information on the inclination of the object. An example measurement produced after the collision of the Iridium and Cosmos satellites is shown in the figure below.

EISCAT UHF beam park measurement of the Iridium-Cosmos collision
debris clouds. Each point represents a detection of an object passing
the radar beam, the color represents radial Doppler shift. full sized version.

One of the potential uses of the planned EISCAT3D system is to track space objects and space debris. One of the advantages of a phased array system is the capability of observing a large volume of space simultaneously and making interferometric direction angle measurements. This will allow accurate trajectory measurements that can be used for collision avoidance with operational spacecraft, such as the International Space Station or Envisat.

For more information on EISCAT space debris activities can be obtained here.