Showing posts with label EISCAT. Show all posts
Showing posts with label EISCAT. Show all posts

Thursday, 11 September 2014

EISCAT_3D Preparatory Phase


This week, we have the last general meeting of the preparatory phase for EISCAT_3D. This project is the next-generation incoherent scatter radar, which will be built in northern Fenno-Scandinavia and, perhaps, beyond. It is an ambitious project, which involved many participants from multiple countries. And, as this particular phase of the project is completed, we are meeting at the Space Physics Institute in Kiruna, Sweden, to discuss the work done, report on the progress made and make plans for the future of this important scientific instrument.

KAIRA has been heavily involved in the project. Although a large multi-purpose facility, capable of carrying out multiple receive-type experiments, it has been used specifically to test certain aspects of the EISCAT_3D proposal. Its deployment garnered useful experience in practical matters regarding the development of a new site and the utilisation and integration of commercially available components within the context of Arctic location and cross-disciplinary application. We have also used KAIRA for new signal processing techniques, such as allowing the lag-profile inversion, and thus accomplishing multibeam, remote-location reception of the EISCAT VHF transmitter signal. This is a critically important step in the construction and operation of \EISCAT for multi-beam, multi-static incoherent scatter radar, and thus true 3D volumetric ionospheric measurement. The KAIRA facility remains operational for on-going EISCAT development and prototyping endeavours.

Undoubtedly, KAIRA will continue to be involved in EISCAT work, and specifically the EISCAT_3D developments. But as this particular part of the project is accomplished, we want to note our involvement and wish the EISCAT Scientific Association all the best for their future goals.

Thursday, 14 August 2014

Sunlight on the EISCAT dish

Arriving back late at the observatory one evening I caught the late evening sun striking the 32m EISCAT dish. The photo doesn't really do it justice, but the colours and lighting were sublime.

The Sodankylä 32m EISCAT dish (Photo: D. McKay-Bukowski)

Sunday, 15 June 2014

KAIRA EISCAT VHF intersection heights/elevations

In order for the KAIRA beam to intersect the vertical EISCAT VHF transmitter beam, the elevation must be set as follows.  (All data provided by I.I.Virtanen, U. Oulu).





Note that the azimuth to the EISCAT VHF is 313.95 degrees. The numbers for the above plots are as follows. Hgt is the height above the EISCAT VHF transmitter in kilometres and Elev is the require elevation of observation from KAIRA to have the beam centre at this height.


Hgt Elev Hgt Elev Hgt Elev
0 -0.735 670 82.155 1340 85.69
10 6.101 680 82.259 1350 85.717
20 12.747 690 82.359 1360 85.743
30 19.044 700 82.457 1370 85.768
40 24.881 710 82.552 1380 85.793
50 30.199 720 82.644 1390 85.818
60 34.987 730 82.734 1400 85.843
70 39.261 740 82.821 1410 85.867
80 43.06 750 82.906 1420 85.891
90 46.431 760 82.989 1430 85.914
100 49.423 770 83.07 1440 85.937
110 52.082 780 83.148 1450 85.96
120 54.451 790 83.225 1460 85.982
130 56.568 800 83.3 1470 86.005
140 58.467 810 83.373 1480 86.027
150 60.176 820 83.444 1490 86.048
160 61.719 830 83.513 1500 86.069
170 63.117 840 83.581 1510 86.09
180 64.39 850 83.648 1520 86.111
190 65.551 860 83.712 1530 86.132
200 66.613 870 83.776 1540 86.152
210 67.589 880 83.837 1550 86.172
220 68.488 890 83.898 1560 86.192
230 69.318 900 83.957 1570 86.211
240 70.087 910 84.015 1580 86.23
250 70.801 920 84.072 1590 86.249
260 71.465 930 84.127 1600 86.268
270 72.084 940 84.181 1610 86.287
280 72.663 950 84.234 1620 86.305
290 73.205 960 84.286 1630 86.323
300 73.714 970 84.337 1640 86.341
310 74.192 980 84.387 1650 86.358
320 74.642 990 84.436 1660 86.376
330 75.067 1000 84.484 1670 86.393
340 75.468 1010 84.531 1680 86.41
350 75.847 1020 84.577 1690 86.427
360 76.207 1030 84.622 1700 86.443
370 76.548 1040 84.667 1710 86.46
380 76.872 1050 84.71 1720 86.476
390 77.18 1060 84.753 1730 86.492
400 77.473 1070 84.795 1740 86.508
410 77.752 1080 84.836 1750 86.523
420 78.019 1090 84.876 1760 86.539
430 78.274 1100 84.916 1770 86.554
440 78.518 1110 84.955 1780 86.569
450 78.751 1120 84.993 1790 86.584
460 78.974 1130 85.031 1800 86.599
470 79.188 1140 85.067 1810 86.614
480 79.394 1150 85.104 1820 86.628
490 79.591 1160 85.139 1830 86.643
500 79.781 1170 85.174 1840 86.657
510 79.963 1180 85.209 1850 86.671
520 80.139 1190 85.243 1860 86.685
530 80.308 1200 85.276 1870 86.698
540 80.471 1210 85.309 1880 86.712
550 80.628 1220 85.341 1890 86.725
560 80.78 1230 85.373 1900 86.739
570 80.927 1240 85.404 1910 86.752
580 81.068 1250 85.435 1920 86.765
590 81.205 1260 85.465 1930 86.778
600 81.337 1270 85.495 1940 86.79
610 81.466 1280 85.524 1950 86.803
620 81.59 1290 85.553 1960 86.815
630 81.71 1300 85.581 1970 86.828
640 81.826 1310 85.609 1980 86.84
650 81.939 1320 85.636 1990 86.852
660 82.049 1330 85.664 2000 86.864

We hope you read all these numbers and memorised them!

Friday, 30 May 2014

Finnish EISCAT campaign, June 2014

A Finnish EISCAT campaign has been scheduled for June 4-10. The campaign objectives are:
  1. Heatncool - D-region ionospheric heating studies by Antti K
  2. Quadriphase-coded experiments - a continuation of the May 2014 campaign! Joint study by Lassi, Björn, Ilkka & Jussi. We also continue the USRP and EISCAT sampling studies, carried out also in May.
  3. TomoScand verification - Ionospheric tomography reconstructions with e-POP satellite mission, joint work with Lassi (SGO) and Johannes Norberg from Finnish Meteorological Institute and a number of collaborating partners from US and Canada, who are involved in the e-POP mission.
  4. EISCAT_3D receiver testing - the objective is to record EISCAT VHF long-pulse-coded experiments in Kilpisjärvi with KAIRA and new receiver technology developed by Siru, Codelma and RF-shamaanit.
Hence a multiobjective EISCAT campaign. I will travel up to Tromsø with Antti on Tuesday June 3 and head back to home around one week later. But in any case, we will try to arrive to Sodankylä prior the Midnight Sun Film Festival. A number of people will be at KAIRA site for all the campaign.

Tuesday, 20 May 2014

A bit of sunshine

Some warm weather and bit of sunshine. We predicted the mosquitoes would follow in a few days. It actually took them 5 hours. Still the weather was pleasant enough to sit outside for afternoon coffee.

The EISCAT 32m dish in the dawn sunshine (Photo: D. McKay-Bukowski)

Wednesday, 14 May 2014

EISCAT_3D User Meeting 2014

The 6th EISCAT_3D User Meeting is going on in Uppsala, Sweden. We started the meeting on Monday afternoon and will finish by midday Wednesday. This meeting has been held annually in Uppsala in May. This year's special topic is complementary measurements.

More info about the event at http://www.space.irfu.se/workshops/EISCAT-3D_User2014/ and the presentations slides at https://www.eiscat3d.se/content/6th-eiscat3d-user-meeting-uppsala-12-14-may-2014.  Here we feature couple photos from the meeting and Uppsala!

The meeting takes place in the Ångströmslaboratoriet of the Uppsala University!


EISCAT Director Craig Heinselman opening the meeting.

Kjellmar Oksavik talking about plasma instabilities and new receivers in Svalbard and Bjørnøya.

.... and here's a coffee break and some informal discussions.

Yep, a photo of the writer of this web log posting giving a talk!


A view from the midtown by the river.




Friday, 9 May 2014

5 MHz EISCAT sampling ... First time ever

During the last day of the quadriphase-coded experiments, we decided to push the limits of the EISCAT sampling system by sampling at 5 MHz with one channel! This allows us to study the plasma lines. In pulse-compression quadriphase code groups are used!

This posting concludes reporting from this successful campaign! We will be back in this business early June!


Two quadriphase codes transmitted and sampled at 5 MHz at EISCAT!

Day 3: Plasma lines and preparations for June campaign

It's the last day of the quadriphase-coded EISCAT experiments. Today we will run some plasma line studies. In addition, we prepare for the upcoming TomoScand campaign (8-10 June), where our objective is to verify TomoScand ionospheric tomography reconstruction against EISCAT measurements. Below is a figure of one of the projected CASSIOPE satellite trajectories. Hence, today we study, if we can use quadriphase-coded experiments in a tracking campaign!

We will commence the operations at 10:30 UT!

... and today after the experiments, I will drive back to Sodankylä (ETA midnight)! ... and on Sunday evening I will fly to Uppsala to the EISCAT_3D User Meeting 2014 !!


Thursday, 8 May 2014

EISCAT plasma parameter plot 8 May 2014

Today we continued the quadriphase-coded experiments with EISCAT UHF in Tromsø, Norway! For comparison purposes, we ran first regular Beata experiment 11:00-11:12 UT. Then we used pretty much the same setting as yesterday, i.e. four code cycles. Below are the preliminary plasma parameter fits. We note that the F-region maximum is in rather good correspondence with the dynasonde measurement! We had one crowbar at 12:26!



Day 2: Quadriphase-coded expms continue

Today we will run nearly the same experiment as yesterday. We have slightly modified the quadriphase codes and this naturally affects analysis. We will report the results in Twitter and hopefully also in the blog in the afternoon! Operations commence at 11:00 UT !!!

In addition to the EISCAT UHF and VHF radars, there is a significant number of other instruments at the EISCAT site. From the KAIRA point of view, one of the most interesting instruments is the MORRO 56 MHz MST radar. The MORRO signals can be received with the KAIRA LBA field! Hence, below is a photo of the MORRO antenna field! ... and yes it is again a very beautiful day in Tromsø!!


Wednesday, 7 May 2014

Day 1: Quadriphase-coded experiments

It's the first day of the quadriphase-code experiments at EISCAT Tromsø! This is a joint Finnish-Norwegian campaign, with a little help from Millstone Hill. We have three basic code cycles:

ac32bin    is the 32-bit binary alternating code from EISCAT UHF beata (64 codes)
cg32bin    is an optimised cycle of 32-bit binary codes (16 codes)
cg32quad is an optimised cycle of 64-bit quadriphase codes (16 codes)

In addition we have an "extra" codeset, a normal beata modulation (ac32bin), but implemented using the 4-phase shifter HW which otherwise is used in the 4-phase code set.

So let us hope that everything goes smoothly!


Panorama of the EISCAT transmitter site: Left-hand side is the VHF radar and right-hand side is the UHF radar! We will use the UHF for this experiment!

Friday, 2 May 2014

EISCAT dish at Sodankylä

Today's Friday Photograph is of the EISCAT dish at the Sodankylä Geophysical Observatory. As you can see, there is still plenty of snow about... even at the beginning of May.

The 32m EISCAT dish at SGO. (Photo: D. McKay-Bukowski)

Have a nice weekend everyone!

Wednesday, 30 April 2014

Snow again

Yesterday it started snowing again at Sodankylä... no summer just yet!

Snow at the EISCAT dish at Sodankylä on 29-Apr-2014. (Photo: D. McKay-Bukowski)

Wednesday, 9 April 2014

KAIRA film


At the LOFAR Science Workshop 2014 in Amsterdam, we premièred the KAIRA film. This was produced by SiteEye in conjunction with Sodankylä Geophysical Observatory, U. Oulu, ASTRON, EISCAT, and many others. (Versions with subtitles in many languages will be posted later.)




Enjoy!


UPDATE!
The film is also available with Finnish subtitles (LINK). 

Sunday, 23 March 2014

The last sweet

In August 2013, we attended the EISCAT symposium in the United Kingdom. At the conference we were all issued with a tin of "rock"... a type of British sweet or candy, where a design is run through the sweet using pulled sugar.

In this case the design was "EISCAT 2013".

Well, I've finally (almost) finished that tin of sweets.

The last one!

Of course the tin was accompanied by a bag of about 500 others, so it was quite a challenge. I suspect I've now got some form of Type-43 Diabetes too.

We had considered posting the sweets back to Mike Kosch (the coference organiser). We'd send them one at a time. One each week. After week. After week.

But no... we just ate them all.

(Hmm... however, I wonder if the other bag of 500 sweets is still around. When I last heard it was in Tromsö, Norway.)

In any case, I guess it really is 2014 now.

Thursday, 6 March 2014

Recent developments in pulse-compression - Upgrading EISCAT UHF

Pulse-compression techniques are regularly used in high-power ionospheric incoherent scatter radars. For example, the EISCAT Tromsø has binary coding possibility. As I have understood pulse-compression, it is typically due to two factors:

  1. High-power amplifier technology supports transmitting longer pulses with lower peak power instead of shorter pulses with very high peak power.
  2. The wanted range resolution is of the order of microseconds or less while range extent of the target is typically milliseconds. Thus if we send microsecond pulse in millisecond intervals, the transmitter is nonoperational for a very large portion of time.
Because of these reasons, we use pulse-compression techniques in high-power radars, i.e. Barker codes, chirped signals etc.

SGO team has concentrated on designing a number of different coding and analysis techniques. The first significant breakthroughs were done already in 1980s with alternating coding development. During recent years, we have been working on perfect pulse-compression coding techniques. These codes were first reported in

[1] M. Lehtinen, B. Damtie, P. Piiroinen and M. Orispää, Perfect and almost perfect pulse compression codes for range spread targets, Inverse Problems and Imaging 3 (2009) 465-486.

A succession to this paper was reported in

[2] L. Roininen and M. S. Lehtinen, Perfect pulse-compression coding via ARMA algorithms and unimodular transfer functions, Inverse Problems and Imaging 7 (2013) 649-661.

The paper [1] included a crucial discussion on comparison of measurements developed by Petteri Piiroinen from University of Helsinki. This mathematical formalism gives us a solid background to compare different kinds of measurements and hence also coding techniques. Paper [2] shows the relation of the coding problem to the classical study of unimodular polynomials with constrained coefficients.

As [1] and [2] need amplitude and binary phase coding, we have not yet run any real measurements with these codes in high-power radars. Of course at some point we will do this also! However, in 2012, we ran a series of polyphase coded experiments with the Millstone Hill ISR in Massachusetts, USA. These were reported in Radio Science

[3]  I. I. Virtanen, F. Lind, L. Roininen, P. Erickson, W. Rideout, M. Orispää, J. Vierinen, and M. Lehtinen,  Polyphase-coded incoherent scatter measurements at Millstone Hill, Radio Science, 48 (2013).

To our knowledge, this was the first reported polyphase-coded ISR experiment.  Of course we want to do similar things with EISCAT system. Hence during the Finnish November EISCAT campaign, we discussed a possibility for doing quadriphase coded experiments by minor modifications of the current EISCAT UHF. This option is now available and we are going to schedule these experiments for the May campaign. Provided that everything will go ok, we will report these experiments in the web log and hope to publish them in peer-reviewed journals!

Naturally we are also continuing the development of the mathematical background for pulse-compression code comparison. This week, we are going to submit a paper on pulse-compression of continuous codes to Inverse Problems and Imaging. The reference is:

[4] L. Roininen, M. S. Lehtinen, P. Piiroinen and I. I. Virtanen, Perfect pulse compression coding via unimodular Fourier multipliers, manuscript in progress.

Hence, we are working on both the mathematical background of the pulse-compression techniques and upgrading the existing hardware to more advanced coding possibilities. And of course... The EISCAT_3D needs a whole lot more!

EISCAT UHF Klystrons!

Friday, 21 February 2014

Sunshine!

Yesterday we had some sunshine at the institute. This is actually quite unusual for this year as, apart from the darkness, it has been cloudy nearly no stop since October. So, a bit of sunshine features as today's Friday photograph. The photo was taken by Lassi in the early afternoon.


Sunshine at the EISCAT Building and 32m antenna. (Photo: L. Roininen)

Have a nice weekend!

Friday, 14 February 2014

Sunlit Hamperokken

It is Friday again, and we have a nice photograph to share with you today, submitted by one of our colleagues from the EISCAT facility, just up the road at Romfjordmoen, near Tromsø.

Hamperokken behind the wires of the ionospheric heating facility. (Photo: M. Rietveld)


The image shows the striking peak of 'Hamperokken' lit by the waning sun at 3.00 pm, Thursday 13 February, with some of the HF antennas of the ionospheric heating facility at Ramfjordmoen in the foreground. Taken while Mike Rietveld was digging about 1.5m into the crusty snow to fix some faulty coaxial cable feed lines in preparation for some Heating campaigns in the coming weeks. The unusually large snowfall and subsequent weather in November has caused considerable damage to the coaxial lines.

Thanks Mike for sharing this with us!

Have a good weekend, everyone.

Wednesday, 5 February 2014

Breakfast at Tähtelä

Busy week this week. So we had a working breakfast in the conference room in the Sodankylä EISCAT building.

Juha, Mikko and Lassi in the EISCAT-building at SGO. (Photo: D. McKay-Bukowski)

Monday, 13 January 2014

Glimmer of sunlight

Yesterday I caught a glimmer of sunlight. With kaamos and the overcast skies, this has been the first hint of sunshine for 2014. Admitedly it was not direct sunlight into my own eyes, but it was definitely striking the 32m EISCAT dish at Sodankylä.

A hint of sunlight on the EISCAT 32m dish at SGO. (Photo: D. McKay-Bukowski)