Showing posts with label scintillation. Show all posts
Showing posts with label scintillation. Show all posts

Thursday, 24 July 2014

Ionospheric "Scintillation Arcs"

Compact radio sources twinkle (“scintillate”) because of variations in density moving around in the interstellar medium, the solar wind and the Earth's ionosphere, in exactly the same way as the visible stars scintillate due to the Earth's atmosphere. This scintillation has been studied for many years and is used as a way of probing these density variations and gleaning information about, for example, the density and velocity of the solar wind.  With KAIRA we have been observing ionospheric scintillation since operations started in 2012.

When viewed as a time series, the scintillation manifests itself as rapid variations in received intensity. If the received signal is also split up into a number of frequency channels across the available bandwidth, the time series' for each channel can be stacked and plotted in a dynamic spectrum which shows how the pattern of scintillation varies with both observing frequency and time.

In modelling the scintillation, we often assume that the signal is scattered by a “thin screen” of density variations (imagine an irregular grid through which light might be diffracted), moving at a certain velocity relative to the radio source. The scattered waves then interfere as they travel further from the screen and the resulting interference pattern is what we receive as scintillation. Multiple thin screens along the line sight can be used to model scattering due to a thicker medium.

Now imagine pairs of waves being scattered by the thin screen: Each pair of scattered waves has a Doppler shift due to the movement of the screen and a time delay between them due to the different path length that each wave has likely followed. A “map” of these Doppler shifts and time delays between every pair of scattered waves can be formed by taking the so-called “secondary spectrum” - effectively the 2-dimensional power spectrum (squared amplitude of the 2-dimensional FFT) of the dynamic spectrum. When this analysis is applied to pulsar observations to study scintillation in the interstellar medium, a clear arc structure termed a “scintillation arc” (first discovered by Dan Stinebring in 2001), is often seen. Over the years this has proved an invaluable tool for probing the interstellar medium.


Now, for we believe the first time, scintillation arcs have been found in the secondary spectra of ionospheric scintillation seen in observations of Cygnus A taken using the KAIRA. It is believed that these also represent the first such broadband (relative to the observing frequency) observations of arcs due to any scattering medium and also the first found using LOFAR hardware. These results have now been written up in a paper recently submitted.

The image shows an example segment of dynamic spectrum and an example secondary spectrum, with the x-axis being Doppler shift and the y-axis being a parameter equivalent to time delay.

Monday, 14 April 2014

Video of ionospheric scintillation

Recently, we ran a small article on ionospheric scintillation and how dramatically it can change depending on atmospheric conditions. A few days later we showed two more interesting plots, both to the same scale, which demonstrated how substantial the different ionospheric scintillation conditions can be.

However, there is nothing quite like a video to really show how the scintillation can affect the signal. So today, we have just that!

What we did was make all-sky images for each of the two extremes shown in that last post we made on the topic.






The observing frequency was the same in both cases 58.594 MHz), 1 second integration per frame, 195.3 kHz bandwidth. The sequence is sped up somewhat (5 minutes data in about 30 seconds of video). As the time of day was the same in both instances, so the radio sky is in roughly the same orientation.

On the 25.12.2013 (left), the ionosphere exhibited extreme scintillation. The two bright sources (Cas A and Cyg A) are flickering quite dramatically. However, exactly two days later (27.12.2013, right), the ionosphere was relatively stable and the brightnesses of the two strong radio sources remain steady.

Wednesday, 2 April 2014

Ionospheric scintillation revisited

On Monday we showed a plot of the ionospheric scintillation of Cas A. Today we have some more data, prompted by a recent data request from a researcher at MAARSY. The two plots cover the same time period, the same scale, the same source and approx. the same local sidereal time. The difference is that one was two days after the other and the contrast in ionospheric scintillation conditions is dramatic.




We also have another project with ionospheric scintillation and it is an area of active research with the instrument.

Oh, and as a bonus, we also captured interferometric data during both of the above times. We'll post a video of the image sequences soon. So, stay tuned!

Monday, 31 March 2014

Variations in scintillation

Ionospheric scintillation is the variation in the amplitude and phase of radio signals as they pass through the ionosphere. What is happening is small-scale variations in the electron density result in differences in the ionosphere's refractive index at radio-frequencies. It is sort of the radio equivalent of the "twinkle of stars". The localised variations in refractive index cause momentary focusing, defocusing or shifting of the incoming radio waves. For broad, diffuse structures in the sky (like the synchrotron emission from the Galaxy) all of these effects average out for different directions. But for a point-source (such as bright "radio stars") the singular line -of-sight can result in dramatic differences.

One of KAIRA's regular experiments has a number of "beams" on the sky. These are sort of like pixels in an image and they monitor the variation in power levels coming from that direction. Most of these have been set up for specific geodetic directions. But we also have some that track astronomical sources.

The following plot shows the radio power coming from the bright radio object Cassiopeia A (or "Cas A" for short).



As can be seen, there are some huge variations. There is a natural variation as Cas A rises higher and lower in the sky (it never sets completely as it is circumpolar at these latitudes). However, this is only a variation between approx. 96.5 and 97.5 on the arbitrary scale used above. The point where the strong scintillation occurs shows huge variations.

Compare the difference between, say, samples around 25000 and around 35000. Not only can the effect be very great, but it can change very quickly too.

Wednesday, 8 January 2014

Combined VHF Radar and KAIRA Ionospheric Scintillation Experiment

For the next three days, KAIRA is set up to observe ionospheric scintillation of the strong radio source Cassiopeia A using mode "357".  This time, however, we are also observing with the EISCAT VHF radar, setup in a tristatic mode, with the aim of establishing what the ionosphere looks like in terms of it's density and velocity structure for the various scintillation conditions we might see.

The image shows a map of northern Fenno-Scandinavia with the locations of the KAIRA and EISCAT sites marked and a track for Cassiopeia A.  This track is of the point of the line of sight from KAIRA to the radio source where it passes through an altitude of 300km, a good estimate of the height of the ionosphere's F-region, plotted from 22:00 UT to 03:00 UT tonight.  As you can see, the track starts almost overhead at the EISCAT radar site and continues almost due northwards.  This makes it ideal for combined observations as the regions which should be causing the scintillation seen by KAIRA can be probed directly by the VHF radar, which is limited to observing overhead and to the north.

Tuesday, 4 June 2013

First Observations of Ionospheric Scintillation in 4-bit mode

On Monday, we reported about experimenting with the 4-bit mode now available at the station.  This allows us to cover up to 190.6 Mhz of continuous bandwidth, four times the amount available using the usual 16-bit mode.  Of course, the low-band and high-band filters only allow up to 80 MHz of continuous bandwidth in any of the 100 MHz Nyquist zones, but it does mean that we can use mode 357 to cover fully the frequency ranges 10-90 MHz, 110-190 MHz and 210-244 MHz simultaneously.  Also, as reported on Monday, there is an issue with saturation across the peak of sensitivity in the low band.

On Sunday night, we carried out the first ionospheric scintillation (as detailed here) observation of Cas A using 4-bit mode.  To alleviate the saturation issue as much as possible, we used the maximum 8 dB attenuation on the signal.  The results look pretty good:

Looking carefully, you can still see a faint band around the 50-60 MHz range, but the scintillation is still clearly visible across this band.  The data themselves also show some very interesting features in the low band, as shown in the 'zoomed-in' image below:

The image is displayed in grey-scale to bring out the features more.  There is a lot of detail to be analysed in these data, particularly as there is no spacing between subbands in 4-bit mode, making it clear that the 4-bit mode is well-enough suited for these kinds of observations.

Thursday, 23 May 2013

Ionospheric Scintillation with KAIRA and LOFAR

Yesterday we had a seminar from one of our visiting scientists. The subject was ionospheric scintillation and the speaker was Richard Fallows from ASTRON, Netherlands. The abstract of the presentation was:


 The wide bandwidth of KAIRA (Kilpisjärvi Atmospheric Imaging Receiver Array) and LOFAR (Low Frequency Array) is opening up new perspectives in the study of ionospheric scintillation. Direct observing at station level has enabled observations which combine low-band and high-band modes to cover the full available frequency bandwidth from 10 to 250 MHz. For the first time, the evolution of scintillation from weak to strong scattering regimes has been directly observed in dynamic spectra. "Scintillation arcs", seen previously in two-dimensional power spectra from interstellar scintillation observations, have been noted for the first time using observations of ionospheric scintillation. This offers new methods of studying the plasma structures giving rise to the scintillation.

It was an excellent talk... really interesting, great results and a lively discussion afterwards. Thanks Richard!


Thomas Ulich (standing) introduces the speaker
Richard Fallows (right). Photo: E. Turunen.

That also prompted us to investigate some of the riometry data that we had taken and look at some of the scintillation effects that we see in that. It was certainly good to examine some of the data with an expert at hand to advise us on what we were seeing.

Friday, 28 September 2012

Using LOFAR LBA and HBA arrays simultaneously

Most LOFAR stations have two antenna fields. These are the Low-Band Antenna (LBA) array and the High-Band Antenna (HBA) array. The LBA and HBA antennas are capable of receiving a range of 10-90 and 110-270 MHz respectively. However, the signal processing is arranged slightly differently. Each "channel" in the signal processing system has three inputs into which the antennas are connected. These receiver units (RCUs), then have several signal paths that can be used, each of which switch in different filters. Thus, the different antennas and frequency bands can be selected and sampled.

Because each individual receiver unit has both an LBA and an HBA polarisation connected to it, it is not possible to observe with both of these simultaneously. Furthermore, because of the filters used in the RCUs, it is not possible to observe across the entire frequency range of the HBA simultaneously either. You must select one of these "RCU modes" for each given channel.

  •  RCU mode 3 = LBA input, 10-90 MHz filters
  •  RCU mode 5 = HBA input, 110-190 MHz filters
  •  RCU mode 7 = HBA input, 210-270 MHz filters

There are other modes as well, such as RCU mode 6, which uses not just different filters, but also a different clock rate (160, rather than 200 MHz) in order to sample the frequencies around 200 MHz (which would normally be aliased in the other modes). The point is that each RCU is limited to a single mode. This has led some to believe that LOFAR stations cannot observe with the LBA and HBA simultaneously.

Actually... they can.

Here at KAIRA, we have been using combinations of modes. In what we refer to as "RCU mode 357", we have been observing with RCU modes 3, 5 and 7 simultaneously. The modes are interleaved, so that there is still a distribution of antennas for each; this allows beam-forming to take place.

Of course, this is not for the faint-hearted, and one must be careful in mapping the channels and powering-up the HBA tiles in such a way so as not to cause power supply failures. However, when done correctly, multiple beams across all bands can be formed giving frequency coverage over nearly the entire VHF band. Here is one of our first results:

A small sample of data from KAIRA, ranging from ~15 to ~275 MHz. Each frequency channel has been divided by the median to bring out the radio features. The bright arcs are ionospheric scintillation during observations of Cas A. (D. McKay-Bukowski, J. Vierinen, and R. Fallows.)
Already we have seen some interesting things and we will be reporting these over the next few days.