Wednesday, 23 February 2011

Simple antennas, but lots of them!

Let's resume the story from Monday, when we were discussing the EISCAT Kiruna Demonstrator Array in Sweden. As we saw in that article, the array is a 12 ×4 grid of 48 Yagi aerials. If you look at an individual one of these aerials, you will see it is really very simple. Just a few rods, some bolts and a cable or two. If you look at one before it is assembled, it looks something like this:
Apart from the tools in the lower right of the photograph... that's it!

When built, the aerial looks like this (shown here at the back of the control building at Kiruna in 2006, before the construction of the actual test array). It was simply attached to a post hammered into the ground at roughly the right angle, to look towards a section of the atmosphere being 'illuminated' by the radio signals of the VHF transmitter from Tromsø.


It looks simple.

But that's the whole idea!

In order for EISCAT (or for that matter, KAIRA, LOFAR or SKA) to work, they rely on a multitude of simple antennas. Each one must be capable of receiving the correct radio frequencies with high fidelity, but as cheaply as absolutely possible.

Then, sheer numbers (plus some clever electronics and computing!) will do the rest.

Tuesday, 22 February 2011

Mid-February status

Another update from the test tiles at Kilpisjärvi. Conditions remain pretty much the same in terms of snow cover, although the temperatures have dropped considerably. These photographs were taken on 18th February 2011 and can be compared to the ones taken on 31st January 2011.

Superficially, the raised tile looks in good condition. From what we can see, all the anchors are holding well, and there has been minimal shifting of the tile. What might be a concern, however, is the condition of anchor lines and the build up of ice, as opposed to light snow. Temperatures are continuing to descend, with recent depths of –30 degrees C.


The ground tile remains an unknown. The snow cover remains just as deep as before, which in reality will mean a greater mass, as the snow will slowly become more densely packed with time.

It will be very interesting to see what emerges in the summer!

Photo credits: Markku Postila

Monday, 21 February 2011

EISCAT-Kiruna Demonstrator Array

KAIRA is not the only project working on the issue of antenna and receiver technology for EISCAT_3D. In addition, there is the so-called 'demonstrator-array', which is located at the EISCAT receiver station at Kiruna, Sweden. I contacted Lars-Göran Vanhainen from the Kiruna site and he explained what this project is all about.

The demonstrator array is a phased array of 48 Yagi antennas, arranged in a 4×12 grid. It operates at VHF frequencies and is capable of detecting signals from the VHF transmitter in Tromsø. The photograph from Lars-Göran shows these Yagi antennas in the foreground. The large dish behind the control building is the 32-metre receiver antenna of the existing EISCAT system.

The demonstrator array was mainly built to be an experimental test bed for the digital receivers and digital beam steering that was proposed in the EISCAT_3D design study. Although the design study has now been concluded, the prototype work is being continued.

The array has now been equipped with fixed delay co-axial beam steering. As it is set up, the array points towards Tromsø at an elevation of 55 degrees, which corresponds to an altitude of 300 km above the Tromsø VHF transmitter. Successful tests have been conducted and bi-static VHF data has been recorded.

Work is now in progress to tilt down the beam to 100 km above Tromsø. The 'beam' is the direction in which a radio receiver array is sensitive. It is a concept like the beam of a search-light, but in reverse; receiving, rather than transmitting.

The objective is to modify the array to be able to do E-region measurements and VHF bi-static studies of meteors and PMSE. These phenomena are both coherent and much stronger than the incoherent scattering from the ambient ionosphere, so even a decrease of the total gain due to the change in the array geometry from optimal should not have an great impact on the measurements in mind.

We'll be talking a lot more about these crucial experiments in future web-log posts!

Friday, 18 February 2011

How long are LOFAR baselines

There has been a bit of misinformation floating about the Internet recently about just how long the LOFAR baselines are. A 'baseline', in this sense, is a short-hand term for the inter-receiving-element distance. In other words, how far apart are the antennas. In the case of LOFAR, the elements are the stations, so the baselines are the distances between the LOFAR stations.

The reason why this is significant is that, ignoring calibration issues, the resolution of the radio telescope is governed by the baselines and the observing frequency. This means that for any given frequency, the longer the baselines, the better the resolution (which is the fineness of detail that the radio telescope can make out). Of course, you can't just have one long baseline... you need the shorter ones too, so that you can resolve all levels of structure in the astronomical object you are observing. (This is what the so-called uv-diagrams show: just how good the coverage of a sparse radio telescope is over all the baselines.)

But it is these 'long baselines' that get quoted in press releases, as they represent the limit of the radio telescope's resolving power.

For LOFAR, although the collecting area and intermediate baselines are dominated by the Dutch stations, it is the so-called International Stations that dominate the long baselines. These stations are:
  • LOFAR DE601 — Effelsberg, Germany
  • LOFAR DE602 — Unterweilenbach, Germany
  • LOFAR DE603 — Tautenburg, Germany
  • LOFAR DE604 — Potsdam, Germany
  • LOFAR DE605 — Jülich, Germany
  • LOFAR FR606 — Nançay, France
  • LOFAR SE607 — Onsala, Sweden
  • LOFAR UK608 — Chilbolton, United Kingdom
Additional stations, such as the proposed station at Birr Castle, Ireland, are not listed here. At the time of writing this, DE605 and SE607 are still under construction or being commissioned. And, to date, DE602 and DE604 has not yet been used in long baseline observations to the western stations.

This means that the longest baselines used so far by LOFAR is the DE603 to UK608 distance, which is 920 km. This was the longest baseline used in the image that recently made the mainstream news.

DE603 (Tautenburg, Germany)... one end of
the longest LOFAR baseline so far. (Photo:
ASTRON & Landessternwarte Tautenburg)



And at the other end, UK608 (Chilbolton, UK). Together these
two stations have a baseline of 920 km. (Photo: STFC Images)


Once all the stations under construction have been completed, the longest baseline will be FR606 to SE607, which would be 1301 km.

If KAIRA is connected to the LOFAR network, the it will add several long baselines, exceeding all of these. The shortest would be the KAIRA to SE607 baselines, at 1350 km, while the longest would be KAIRA to FR606 at 2594 km. As can be seen, ignoring position angles, these KAIRA baselines would extend the LOFAR International Telescope very well.

However, even with KAIRA, LOFAR will still fall well short of the 10,000 km that is currently being claimed by some web sites. If only the funding agencies would make those sorts of errors, then, yes, we'd definitely have 10,000 km baselines! ;-)

Tied-array Superterp

Large multi-element radio telescopes are frequently used in a special way. This mode of operation is known as 'tied-array' and the way that it works is that signals from separated antennas (or arrays of antennas) are added coherently. The sensitivity of coherently combined stations should increase by the square-root of the number of stations compared with the incoherent station sum. Instead of working as multiple stations, they work as if they are just a single station. The output sum signal can be used in experiments such as very long baseline interferometry, pulsar and transients observations, extra-terrestrial intelligence signal detection.

Within each LOFAR station, the signals from the antennas are phased to create a single output. However, on the 7th February, LOFAR announced that they had successfully combined the first data coherently from not just the antennas of a single station, but the antennas of multiple stations. The stations used were the 12 HBA fields of the so-called 'superterp' — a large collection of small LOFAR stations, grouped together in the north of the Netherlands.

The Superterp: 6 LBA fields and 12 HBA fields,
clustered together on a moated circle of land.
(Photo: ASTRON, TopFoto Assen)


This new development has greatly improved the sensitivity of the LOFAR system. The EISCAT_3D system will also make use of this technique to improve sensitivity.

LOFAR Press Release: http://www.lofar.org/first-lofar-tied-array-beam-achieved

Thursday, 17 February 2011

EISCAT_3D

Mentioned on several occasions is the EISCAT_3D project.

The EISCAT Scientific Association operates three incoherent scatter radars in Tromsø (Norway) and on Svalbard. The UHF radar, which operates at 930 MHz, is the only tristatic incoherent scatter radar in the world. The transmitter is located in Tromsø and additional receiver sites are in Kiruna (Sweden) and Sodankylä (Finland).

However, there are ambitious plans afoot to build the next generation incoherent scatter radar, which will provide comprehensive 3D monitoring of the atmosphere and ionosphere above Northern Fenno-Scandinavia. This new radar system — called EISCAT_3D — will consist of multiple phased arrays, using the latest digital signal processing to achieve ten times higher temporal and spatial resolution than the present scientific radars. It will have pplications in a wide range of European research areas including Earth environment monitoring and technology solutions supporting sustainable development, well beyond atmospheric and space sciences.

EISCAT_3D will be a volumetric radar capable of imaging an extended spatial area with simultaneous full-vector drift velocities, having continuous operation modes, short baseline interferometry capability for imaging sub-beamwidth scales, real-time data access for applications and extensive data archiving facilities.

The design of the antenna arrays will be modular at different scales allowing for mass-production of the components. Some arrays will be very large, in the scale of 32,000 individual antenna elements. The receiver arrays will be located at 50-150 km distance from the transmitters, with some smaller arrays close by to support continuous interferometric observations. The total system will comprise approximately 100,000 elements. Construction is due to start in 2015.

KAIRA is an integral part of the EISCAT_3D development process. It will test whether or not LOFAR production items are suitable to the EISCAT_3D project, possibly leading to a mass deployment of LOFAR hardware in the far north. However, it is not the only possibility, and other array designs are being considered. One of these prototypes under evaluation is the Kiruna Demonstrator Array; there will be a web log post about this soon!

EISCAT_3D website: http://www.eiscat3d.se/

Wednesday, 16 February 2011

LOFAR Single-Station Meeting

On the 14th and 15th of February 2011, the latest LOFAR Single-Station meeting was held in Oxford in the United Kingdom, attended by over 20 LOFAR experts. The Single-Station meetings are an important part of the LOFAR programme. Instead of using the entire LOFAR telescope for observations, these meetings discuss what science can be achieved if the LOFAR stations work independently of the main array. They also discuss the technical issues and challenges of such experiments.

Although this mode of operation is not the standard long-baseline one, it is nevertheless an important part of the LOFAR programme, as it allows individual stations the opportunity to explore new ideas and to perform their own experiments. It also serves as a vital part of the undergraduate training, as students get an opportunity to use these huge telescope arrays for their learning.

KAIRA is a fantastic example of LOFAR hardware being used for local experiments. We gave a exposition of the work we are doing and helped promote our Finnish project. But other presentations were also of great interest to us. Issues such as pack-ice and snow drifts (Tautenburg), humidity in cold climates (Effelsberg) and new LOFAR stations (Hamburg, Aberystwyth and Birr Castle) have kept discussions active and lively. It was also great to see the best of the results from single-station facilities and the new data acquisition systems being developed by the group at Oxford University.

Our thanks go to the Oxford organising committee for hosting such an engaging and inspiring meeting and to Dell Computers for their support of the event.