Monday, 28 February 2011

SKA — Square Kilometer Array (Part 1)

We've just been to the Square Kilometre Array (SKA) Concept Design Review, held in Manchester in the United Kingdom. Attendance has been as an observer, but it has certainly been very useful to meet with the SKA community. There is a degree of overlap in technologies between the SKA, LOFAR, EISCAT and KAIRA projects and there are many opportunities for fruitful collaboration.

SKA will probably be mentioned a lot in the web log as the months go by. It is a big project, and sits firmly in the scientific vision of most groups undertaking radio astronomy. But what is it?

SKA, as the name suggests, is an array of antennas with a total collecting area of 1 square-kilometre. 1 square kilometre is 1 million square metres, so this is big compared to the 4800 m2 of KAIRA, and it will even outstrip LOFAR and EISCAT.

The antennas will be grouped into stations, with a large number of these stations clustered together into a 'core' (in the same way that LOFAR has a 'core' of stations that are close together).

Artist's impression of how clusters of tile-antennas in the central region
of the SKA might look. (Image:
SPDO/Swinburne Astronomy Productions)


These core stations will cover an area some 5 km or so. The furthest stations will be scattered out to distances of several thousand kilometres from the core.

Layout of the central region of the SKA. (Image:
SPDO/Swinburne Astronomy Productions)


This requirement for a large area, as well as a desire to build it in the southern hemisphere (for astronomical reasons) and a need to keep away from interfering radio signals has limited the possible locations where the SKA can be built. Currently there are two candidate sites: one is Australia and one in South Africa. The decision on this will be made in the next few years.

Tomorrow we'll have a closer look at the SKA antenna systems themselves.

Friday, 25 February 2011

The EISCAT VHF transmitter

As we have seen, the site at Tromsø run by the EISCAT Scientific Association has several instruments. The most significant of these to KAIRA is the VHF transmitter, because its frequency (224 MHz) is within the high-band of the KAIRA system. This frequency is also very close to the proposed frequency of the EISCAT_3D project.

The Tromsø VHF system is a scientific radar. Using the incoherent scatter principle, it transmits radio power into the upper atmosphere and detects the faint radio echoes. From these, it can readily determine the electron density, ratio of the electron temperature to ion temperature, ratio of the ion temperature to ion mass, and the line-of-sight ion velocity.

The Tromsø VHF antenna is huge: 120×40 metres in size. It comprises 4 panels, each 30×40 metres, which can be steered in elevation independently of each other. The system cannot turn in azimuth, but it is possible to reconfigure the phase of the transmitter array to provide a small amount of horizontal directional control.

The transmission power is provided by a klystron. The transmission frequency is 224 MHz (well inside the range of a LOFAR HBA antenna) and the peak transmission power is 1.6 MW. The feed system is a line of 128 crossed dipoles at the focal line of the parabolic-cylindrical antenna panels. This line can be seen to the right of the panels in the first photograph. To get an idea of the scale, that line is actually a corridor and engineers can walk along the inside of it. The second photograph shows a close-up of one of the individual crossed dipoles.

Thursday, 24 February 2011

EISACT Tromsø

Two of the EISCAT radar transmitters are located in Ramfjordmoen, close to the city of Tromsø in Norway. The people working here are employed by The University of Tromsø.

The EISCAT UHF (Ultra High Frequency) radar operates at 931 MHz and is driven by two klystrons with a peak transmission power of 2 MW. The antenna is a 32-metre diameter dish, which weighs about 100 tonnes. It is fully steerable, and can scan at speeds of 80 degrees per minute in both the azimuth and elevation axes. It can accelerate to full speed within 2 seconds.

The other radar is the VHF system, shown in the second photograph. This is a 120×40 metre antenna with a 224 MHz transmitter. This radar is of particular significance to the KAIRA project, so we'll write about it in full tomorrow.

In addition to the radars, there is a Heating Facility, which is used for modification experiments. It applies high-power transmissions of high-frequency electro-magnetic waves to the ionosphere to study its plasma parameters. The name Heating stems from the fact that these high power electromagnetic waves, which are transmitted into the ionosphere with high-gain antennas, heat the electrons and thus modify the plasma state. To create plasma turbulence, the transmitted frequencies have to be close to the plasma resonances, which are 4 to 8 MHz.

There is also a Dynasonde (a digital HF sounder) covering a frequency range of approximately 1-20 MHz. Six dipoles are used as spaced receiving antennas. Each half of each dipole is made from an aluminium tube, 11 metres long and 15 centimetres in diameter. These tubes are suspended about 2 metres above the ground. Even so, they do break sometimes through weight of snow and metal fatigue as they vibrate in the wind.

More information about these systems can be found at the EISCAT website: http://www.eiscat.se/about

But there will be more about the VHF system tomorrow!

Wednesday, 23 February 2011

Simple antennas, but lots of them!

Let's resume the story from Monday, when we were discussing the EISCAT Kiruna Demonstrator Array in Sweden. As we saw in that article, the array is a 12 ×4 grid of 48 Yagi aerials. If you look at an individual one of these aerials, you will see it is really very simple. Just a few rods, some bolts and a cable or two. If you look at one before it is assembled, it looks something like this:
Apart from the tools in the lower right of the photograph... that's it!

When built, the aerial looks like this (shown here at the back of the control building at Kiruna in 2006, before the construction of the actual test array). It was simply attached to a post hammered into the ground at roughly the right angle, to look towards a section of the atmosphere being 'illuminated' by the radio signals of the VHF transmitter from Tromsø.


It looks simple.

But that's the whole idea!

In order for EISCAT (or for that matter, KAIRA, LOFAR or SKA) to work, they rely on a multitude of simple antennas. Each one must be capable of receiving the correct radio frequencies with high fidelity, but as cheaply as absolutely possible.

Then, sheer numbers (plus some clever electronics and computing!) will do the rest.

Tuesday, 22 February 2011

Mid-February status

Another update from the test tiles at Kilpisjärvi. Conditions remain pretty much the same in terms of snow cover, although the temperatures have dropped considerably. These photographs were taken on 18th February 2011 and can be compared to the ones taken on 31st January 2011.

Superficially, the raised tile looks in good condition. From what we can see, all the anchors are holding well, and there has been minimal shifting of the tile. What might be a concern, however, is the condition of anchor lines and the build up of ice, as opposed to light snow. Temperatures are continuing to descend, with recent depths of –30 degrees C.


The ground tile remains an unknown. The snow cover remains just as deep as before, which in reality will mean a greater mass, as the snow will slowly become more densely packed with time.

It will be very interesting to see what emerges in the summer!

Photo credits: Markku Postila

Monday, 21 February 2011

EISCAT-Kiruna Demonstrator Array

KAIRA is not the only project working on the issue of antenna and receiver technology for EISCAT_3D. In addition, there is the so-called 'demonstrator-array', which is located at the EISCAT receiver station at Kiruna, Sweden. I contacted Lars-Göran Vanhainen from the Kiruna site and he explained what this project is all about.

The demonstrator array is a phased array of 48 Yagi antennas, arranged in a 4×12 grid. It operates at VHF frequencies and is capable of detecting signals from the VHF transmitter in Tromsø. The photograph from Lars-Göran shows these Yagi antennas in the foreground. The large dish behind the control building is the 32-metre receiver antenna of the existing EISCAT system.

The demonstrator array was mainly built to be an experimental test bed for the digital receivers and digital beam steering that was proposed in the EISCAT_3D design study. Although the design study has now been concluded, the prototype work is being continued.

The array has now been equipped with fixed delay co-axial beam steering. As it is set up, the array points towards Tromsø at an elevation of 55 degrees, which corresponds to an altitude of 300 km above the Tromsø VHF transmitter. Successful tests have been conducted and bi-static VHF data has been recorded.

Work is now in progress to tilt down the beam to 100 km above Tromsø. The 'beam' is the direction in which a radio receiver array is sensitive. It is a concept like the beam of a search-light, but in reverse; receiving, rather than transmitting.

The objective is to modify the array to be able to do E-region measurements and VHF bi-static studies of meteors and PMSE. These phenomena are both coherent and much stronger than the incoherent scattering from the ambient ionosphere, so even a decrease of the total gain due to the change in the array geometry from optimal should not have an great impact on the measurements in mind.

We'll be talking a lot more about these crucial experiments in future web-log posts!

Friday, 18 February 2011

How long are LOFAR baselines

There has been a bit of misinformation floating about the Internet recently about just how long the LOFAR baselines are. A 'baseline', in this sense, is a short-hand term for the inter-receiving-element distance. In other words, how far apart are the antennas. In the case of LOFAR, the elements are the stations, so the baselines are the distances between the LOFAR stations.

The reason why this is significant is that, ignoring calibration issues, the resolution of the radio telescope is governed by the baselines and the observing frequency. This means that for any given frequency, the longer the baselines, the better the resolution (which is the fineness of detail that the radio telescope can make out). Of course, you can't just have one long baseline... you need the shorter ones too, so that you can resolve all levels of structure in the astronomical object you are observing. (This is what the so-called uv-diagrams show: just how good the coverage of a sparse radio telescope is over all the baselines.)

But it is these 'long baselines' that get quoted in press releases, as they represent the limit of the radio telescope's resolving power.

For LOFAR, although the collecting area and intermediate baselines are dominated by the Dutch stations, it is the so-called International Stations that dominate the long baselines. These stations are:
  • LOFAR DE601 — Effelsberg, Germany
  • LOFAR DE602 — Unterweilenbach, Germany
  • LOFAR DE603 — Tautenburg, Germany
  • LOFAR DE604 — Potsdam, Germany
  • LOFAR DE605 — Jülich, Germany
  • LOFAR FR606 — Nançay, France
  • LOFAR SE607 — Onsala, Sweden
  • LOFAR UK608 — Chilbolton, United Kingdom
Additional stations, such as the proposed station at Birr Castle, Ireland, are not listed here. At the time of writing this, DE605 and SE607 are still under construction or being commissioned. And, to date, DE602 and DE604 has not yet been used in long baseline observations to the western stations.

This means that the longest baselines used so far by LOFAR is the DE603 to UK608 distance, which is 920 km. This was the longest baseline used in the image that recently made the mainstream news.

DE603 (Tautenburg, Germany)... one end of
the longest LOFAR baseline so far. (Photo:
ASTRON & Landessternwarte Tautenburg)



And at the other end, UK608 (Chilbolton, UK). Together these
two stations have a baseline of 920 km. (Photo: STFC Images)


Once all the stations under construction have been completed, the longest baseline will be FR606 to SE607, which would be 1301 km.

If KAIRA is connected to the LOFAR network, the it will add several long baselines, exceeding all of these. The shortest would be the KAIRA to SE607 baselines, at 1350 km, while the longest would be KAIRA to FR606 at 2594 km. As can be seen, ignoring position angles, these KAIRA baselines would extend the LOFAR International Telescope very well.

However, even with KAIRA, LOFAR will still fall well short of the 10,000 km that is currently being claimed by some web sites. If only the funding agencies would make those sorts of errors, then, yes, we'd definitely have 10,000 km baselines! ;-)