Tuesday, 15 February 2011

HBA layout — Part 2 (KAIRA)

As we described in yesterday's article, there are three standard configurations for High-Band Arrays (HBAs) in conventional LOFAR stations. KAIRA will also use LOFAR hardware for its antennas, thus making use of the proven design and also retaining compatibility with the LOFAR system. In total, there will be 48 HBA tiles in KAIRA. But although you might first think that the KAIRA layout might look similar to a 'remote station' or perhaps even a two-part 'core station', this is not the case.

There are some constraints on the KAIRA layout. These are:

  • It has to maintain a elongation in the direction of the Tromsø VHF transmitter. This is to maintain the optimal beam pattern when looking at target regions of the ionosphere.
  • There needs to be good access to the site, in order to deploy the tiles, maintain them, and protect them from the Arctic conditions.
  • The volume of levelling of the ground needs to be minimised. This is to save costs, but it also saves valuable time during the extremely short summer when the array will be installed.
  • There needs to be the option to upgrade KAIRA from 48 tiles to a full 96 tiles, thus converting it into a full-size international station.
  • And, that upgrade needs to be done in a way to achieve the standard international layout, with minimum disruption to the existing array.

This means that the most optimal layout is a 4×12 grid. From there, only one row of tiles needs to be removed, and then additional tiles added to the sides, to complete the upgrade to the full international station layout.



The 4×12 layout is then rotated so that it points at an azimuth of 313 degrees with respect to North. This puts it on the alignment axis between Kilpisjärvi and the VHF transmitter in Tromsø (we'll write more on this transmitter soon). Curiously, it is also the same layout as the Kiruna phased array, which is part of the EISCAT_3D prototype work (yes... there be an article on that soon, too!).

Working out how the array (and the possible upgrade) will be placed on the mound, has been a time-consuming process. Because the placement is so critical, a great deal of attention has been paid to the survey and analysis to make sure we get this right

This is what the configuration looks like:



The dark-blue squares are the HBA tiles of KAIRA. The red outlines are the additional tiles that would need to be added to convert KAIRA to a full international LOFAR station configuration. In addition, the four end tiles (in the lower-right) of KAIRA would need to be removed to restore the symmetry. The white dot marks the centre of the international station layout. This would also be the dummy tile in that configuration, although it is a fully active tile in the KAIRA layout.

There will be lots more about the KAIRA configuration and deployment over the coming months.

Monday, 14 February 2011

HBA layout — Part 1 (LOFAR)

As described in our previous article, LOFAR is a pan-European telescope, split into stations and in each station there is typically two arrays of antennas: the High-Band Array (HBA) and the Low-Band Array (LBA). KAIRA, which is based on LOFAR antenna hardware, will also have an HBA and LBA. But the question is what sort of LOFAR station will it be?

You see, even though LOFAR is split into many stations, not all LOFAR stations are the same. In the Netherlands — the centre of the LOFAR network — where the stations are close together, there are more of them, but they are smaller.

One of the LOFAR stations near the core of the network. Note that
there are two small patches of HBA tiles. The 'shotgun pattern' of
antennas in between them is the LBA. (Photo: LOFAR Gallery)

As you move out from the centre of the network, the stations get bigger and their configurations change. This is for a number of reasons to do with performance, cost and ease of deployment. In this article, we'll only consider the HBA in the station, as this is where the changes are the most striking and where the most pronounced difference between LOFAR and KAIRA will be realised.

Essentially, there are three types of standard LOFAR station:

  • Core stations = 2 × 24 HBA tiles
  • Remote stations = 48 HBA tiles
  • International stations = 96 HBA tiles

This is what these configurations look like (note you can click on any of the weblog images to see larger versions):

As you can see, in reality there is one additional tile right in the centre of the international station layout. This is not an active antenna... just an empty tile. This keeps the RF-load balanced across the array and prevents wind-turbulence cells being generated at the 'hole in the middle'. There is a more detailed explanation of this on the LOFAR-UK weblog article 'Going the extra tile'.


The completed HBA at the Chilbolton LOFAR
station in Hampshire, UK. (Photo: STFC Images)

So that's the description of the LOFAR station HBA layouts. But what of KAIRA?

Despite having the same hardware, KAIRA is quite different and with some distinctive features, dictated by its multi-purpose applications, challenging build site and some interesting future plans.

But we'll discuss that in tomorrow's web log post!

LOFAR Ireland

We extend a welcome to the LOFAR community to our colleagues in Ireland.

There is a new website for 'i-LOFAR' — a LOFAR station in Ireland. This is a new proposal for another international LOFAR station, to be located at Birr Castle. At station placed here will extend the longest baseline of the LOFAR International Telescope even further.

Birr Castle itself is a historic astronomy site. It is the place where the Rosse Telescope was built; the largest telescope of its day. This 183cm optical telescope was completed in 1845 and remained the largest telescope in the world for many decades.

Once again, this historic site will be associated with the largest telescope in the world... the LOFAR International Telescope. (And, this will be the first LOFAR station with a castle!)

Visit the LOFAR Ireland website at: http://www.lofar.ie/

Sunday, 13 February 2011

LOFAR status update

There are now 32 LOFAR stations operational:
  • 20 core stations in the Netherlands
  • 7 remote stations, also in the Netherlands
  • 3 international stations in Germany (Effelsberg, Unterweilenbach, Tautenburg)
  • 1 international station in France (Nançay)
  • 1 international station in the United Kingdom (Chilbolton)
And more are on the way!

Friday, 11 February 2011

Where is Kilpisjärvi?

As we've mentioned before, KAIRA will be built at Kilpisjärvi (after all, it's in the name!). However, the Sodankylä Geophysical Observatory is — yes, you guessed it — located in Sodankylä. So, in response to the call for a more enlarged map (compared to our EISCAT/LOFAR/KAIRA overview map), today's web log entry does just that. Zooming in on the Lapland area, both Kilpisjärvi and Sodankylä are clearly marked and show that KAIRA is right there in the corner of Finland, quite a way from SGO.

Kilpisjärvi (Northern Sami: Gilbbesjávri) itself is actually a small settlement in the north-western part of Enontekiö municipality. That small patch of Finnish territory wedged in between Norway and Sweden is known as the Finnish arm of Lapland and Kilpisjärvi is at the end of it. The settlement is quite small, with less than 100 inhabitants. It is an isolated part of the world, with the next nearest settlement over 40 km away.

Still, it is recognisable place, perhaps because of its famous landmark: Saana (Northern Sami: Sána). This fell towers some 556 metres above the nearby Kilpis lake and its summit is a total of 1029 metres above sea-level. It is clearly visible from the KAIRA site as this photograph shows, taken at the end of the 2010 summer, when we did the site survey. It is absolutely clear that many of the best photographs of the KAIRA project that will be posted this year will feature Saana in the background!

At this time of the year however, it breaks through winter’s silent grip on the landscape and stands there as an imposing Arctic sentinel; a natural fortress for trolls, giants and other creatures of Nordic mythology.

I wonder if there are any Sami legends about this beautiful fell?

Thursday, 10 February 2011

EISCAT

EISCAT can sometimes be a confusing term. Sometimes it refers to the organisation, sometimes the instruments that it operates and at other times to an upcoming project, which is closely connected with our KAIRA work.

The EISCAT Scientific Association is an international research organisation operating three powerful scientific radars in Northern Scandinavia. It is funded and operated by research councils in various member countries. EISCAT itself, stands for European Incoherent SCATter, which is a reference to the radar technique that is used (more on this later!). These radars, along with an Ionospheric Heater and Dynasonde facility are used to study the ionosphere and the interaction between the Sun and the Earth (a field broadly referred to as Solar-Terrestrial Physics).

EISCAT operate several sites. The transmitters are located near Longyearbyen (Svalbard) and Tromsø (Norway). In addition, there are receiver stations located near Kiruna (Sweden) and Sodankylä (Finland) at the SGO site. The headquarters for the EISCAT Scientific Association is located in Kiruna and there are support groups in various of the institutes and universities of the member countries. The transmitter and receiver sites are all marked on the map that was recently posted.

In addition to the existing facilities, EISCAT is now undertaking a new ambitious project - EISCAT_3D. This is a new-generation radar that will provide a huge increase in capabilities of any existing scientific radars. KAIRA, in addition to its own scientific goals and close ties to the LOFAR project, is intricately connected with this EISCAT_3D development work, and there will be a lot more posted about this during the coming months.

Wednesday, 9 February 2011

Finnish Meteorological Institute

Co-located with SGO is Ilmatieteen laitos — the Finnish Meteorological Institute (FMI). Today we are delighted to be able to give a small presentation of the work done by them.

Space weather research at FMI includes both modelling and monitoring activities. The Institute owns and operates the only global Magneto-Hydro-Dynamic (MHD) simulation code in Europe and has conducted pioneering work in the theoretical modelling of Geomagnetically Induced Currents (GIC). On the observational side the main asset is the MIRACLE network of auroral cameras and magnetometers which is operated in the Northern Fennoscandia as international collaboration project where FMI serves as the PI-institute. Ionospheric researchers of the Institute have developed several methods for extracting value added data products from the network observations (e.g. latitude-longitude maps of equivalent ionospheric currents and auroral precipitation flux). These tools have been used in several research projects which typically utilise also EISCAT Incoherent Scatter data and various satellite observations in the research of meso-scale magnetosphere-ionosphere coupling processes.

During recent years the trend in MIRACLE research has been to move from the two-dimensional picture to three dimensional imaging of ionospheric conditions. For this reason, FMI has started closer collaboration with SGO in a project (TOMOSCAND) which will develop tomographic analysis methods for ionospheric electron density reconstructions. The aim is to use data from both GPS and Beacon receivers in the analysis and in a later stage perhaps also the standard MIRACLE observations can be integrated to the system. The future vision is to use TOMOSCAND measurements together with EISCAT_3D for monitoring radiowave propagation conditions in the Northern Europe. FMI participates as an associate member to the EISCAT_3D Preparatory Phase activities. The KAIRA project is of particular interest to FMI because the technical development of the system has synergy with the TOMOSCAND work and the array in Kilpisjärvi is located in the core area of the current MIRACLE and forthcoming TOMOSCAND field-of-views.

Links:

With thanks to Kirsti Kauristie and FMI.