Wednesday, 31 October 2012

Test LBA system at Pittiövaara

The original plan was to build 96 LBA aerials at KAIRA. That plan was altered because of ground stability considerations, limited signal processing and some other interesting ideas. So, although we've installed 48 aerials at KAIRA, the remainder will be used for other tests and experiments.

At the moment, we've installed four of these aerials at Pittiövaara, a small field station not far from the main institute at Sodankylä. These are being used to test a new digital signal processing concept being developed by SGO.

One of the test aerials at the Pittiövaara site. (Photo: D. McKay-Bukowski)

Of course, at KAIRA, being much further into the Arctic you would never get trees like this!

Monday, 29 October 2012

LOFAR observations of Virgo A

Today, ASTRON announced some stunning new results of the radio galaxy Virgo A (also referred to as Vir A, M87, etc.) along with a great image taken by the International LOFAR Telescope:

This false colour image shows the galaxy M87. Optical light is shown in white/blue (Credits: SDSS), the radio emission in yellow/orange (LOFAR). At the centre, the radio emission has a very high surface brightness, showing where the jet powered by the supermassive black hole is located. Credits: Francesco de Gasperin, on behalf of the LOFAR collaboration.

From their press release...
Using a brand-new radio telescope, astronomers have produced one of the best images ever made at the lowest frequencies of giant bubbles produced by a super-massive black hole. The observations were performed at frequencies ranging from 20 to 160 MHz which are normally used for communications by {aeroplane} pilots. The picture shows what looks like a giant balloon filled with radio emitting plasma, which exceeds the size of an entire galaxy.
Refer to the full press-release in the links section below for details.

Links

Winter welcome

Well, in the past few weeks Winter has been arriving. In fact, things are moving faster than we can keep up with this web log (... so much to do!). In any case, here are some of the first Winter scenes from Sodankylä Geophysical Observatory for the season.

View from the EISCAT building. (Photo: D. McKay-Bukowski)

A wintry scene along the road through Tähtelä. (Photo: D. McKay-Bukowski)

Sunday, 28 October 2012

Observing tips #3 — Starting/stopping KBT experiments

KBT (KAIRA Background Task) as an observing system for scheduling and running pre-designed scripts. The following is the instruction set for getting KBT observations started.

Starting KBT observations
  1.  Be organised and log in to KAIRA01 at least 30 mins in advance, thus checking that you have a password, etc.
  2. When you have been allocated the telescope, you will receive an e-mail from someone (usually the previous observer). 
  3. When you get the "it's all yours now" e-mail, log in to the LCU.
  4. Double check the system is reset and ready to use. To do this, type:

    %  swlevel

    You should see "Currently set level is 0" and all processes are down. If not, get help.
  5. Check the current experiment with kbt.

    %  kbt --status

    It should be STOPPED. If not, get help.
  6. Change the experiment to yours.

    % kbt --list
    % kbt --experiment=rio3_v45z

  7. Start the experiment

    % kbt --start

    Your experiment is now starting. Note that it takes 2 minutes to fully start. Eventually, you will get your prompt back.
  8. Your experiment is now running. You should check that it is recording data files. First, use kbt to find where the data is going:

    % kbt --variables

    Look for "datapath".
  9. Use "ls" to inspect the datapath and check that the data is being recorded.If all is going well, there is no need to give the system further attention until the observations are over.
Stopping KBT observations

  1. Stop your observations with KBT.

    %  kbt --stop

    Note that this might take a little while.
  2. Double check that the system is reset and ready to use for the next observer. To do this, type:

    %  swlevel

    You should see "Currently set level is 0" and all processes are down. If not, get help.
  3. Then, and this is VERY IMPORTANT, send an e-mail to the next observer with a CC to lofar-obs to inform the observing team that you are finished.
That's it! You should now consider exporting your data.

Friday, 26 October 2012

Arctic skies

Just a nice image to finish the week. Enjoy...

The Arctic sky, looking southwest past the KAIRA HBA array. Photo: D. McKay-Bukowski.

Thursday, 25 October 2012

Freezing over

We took these photographs are the Sodankylä Geophysical Observatory recently. With theonset of the Autumn, the temperatures are dropping rapidly and winter will soon be upon us. And, of course, the water in the area is starting to freeze over.

First crystals forming in the puddles. (Image: D. McKay-Bukowski)

The Kitinen River starting to freeze over. (Image: D. McKay-Bukowski)

Tuesday, 23 October 2012

VHF upgrade at SGO — Part 3

And finally, the new receiver is installed on the 32 m antenna.

The new prime-focus, VHF feed. (Photo: D. McKay-Bukowski)